nwmgr new on HP-UX 11.31

networking commands like linkloop, lanscan, lanadmin etc on 11.31 got obsoleted and got replaced with 'nwmgr' command.
it gives lot of informations.
here is the output of lanscan and nwmgr.
cmd root> lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/2/2/0 0x001F29BCFADC 2 UP lan2 snap2 1 ETHER Yes 119
0/2/2/1 0x001F29BCFADD 3 UP lan3 snap3 4 ETHER Yes 119
LinkAgg0 0x001F29BCFABE 900 UP lan900 snap900 6 ETHER Yes 119
LinkAgg1 0x000000000000 901 DOWN lan901 snap901 7 ETHER Yes 119
LinkAgg2 0x000000000000 902 DOWN lan902 snap902 8 ETHER Yes 119
LinkAgg3 0x000000000000 903 DOWN lan903 snap903 9 ETHER Yes 119
LinkAgg4 0x000000000000 904 DOWN lan904 snap904 10 ETHER Yes 119
--------------------------------------------------------------------------------
@root:/> nwmgr

Name/ Interface Station Sub- Interface Related
ClassInstance State Address system Type Interface
============== ========= ============== ======== ============== =========
lan2 DOWN 0x001F29BCFADC igelan 1000Base-SX
lan0 UP 0x001F29BCFABE igelan 1000Base-SX lan900
lan1 UP 0x001F29BCFABF igelan 1000Base-SX lan900
lan3 UP 0x001F29BCFADD igelan 1000Base-SX
lan900 UP 0x001F29BCFABE hp_apa hp_apa
lan901 DOWN 0x000000000000 hp_apa hp_apa
lan902 DOWN 0x000000000000 hp_apa hp_apa
lan903 DOWN 0x000000000000 hp_apa hp_apa
lan904 DOWN 0x000000000000 hp_apa hp_apa